M8×1 Torque Spec
Calculated preload torque by grade, plus what actually changes the number.
M8×1 · 8.8 · dry threads
27.3 N·m
20.1 lb-ft · targets 17
kN clamp load (75% of proof)
By grade
| Grade | Dry (N·m) | Lubed (N·m) | Dry (lb-ft) | Clamp load | Ultimate tensile |
|---|---|---|---|---|---|
| 4.6 Low-carbon steel, general purpose | 10.6 | 7.93 | 7.8 | 6.6 kN | 15.7 kN |
| 8.8 Medium-carbon, quenched & tempered — the default structural grade | 27.3 | 20.4 | 20.1 | 17 kN | 31.3 kN |
| 10.9 Alloy steel, Q&T — high strength | 39 | 29.3 | 28.8 | 24.4 kN | 40.7 kN |
| 12.9 Alloy steel, Q&T — highest common grade (socket head cap screws) | 45.6 | 34.2 | 33.6 | 28.5 kN | 47.8 kN |
| A2-70 304 stainless, cold worked | 21.2 | 15.9 | 15.6 | 13.2 kN | 27.4 kN |
Why lubrication changes everything
Roughly 90% of the torque you apply is consumed by friction — under the head and in the threads. Only about 10% becomes useful bolt stretch. That means the friction coefficient, not the bolt, sets the relationship between torque and clamp load. Here is the same M8×1 8.8 fastener under different conditions:
| Thread condition | Nut factor K | Torque for same preload |
|---|---|---|
| Plain / as-received, dry | 0.20 | 27.3 N·m |
| Zinc plated, dry | 0.22 | 30 N·m |
| Black oxide, lightly oiled | 0.18 | 24.5 N·m |
| Machine oil on threads | 0.15 | 20.4 N·m |
| Molybdenum disulfide / anti-seize | 0.12 | 16.4 N·m |
| Waxed or PTFE coated | 0.10 | 13.6 N·m |
Torquing a lubricated bolt to the dry spec overloads it — the
13.6
N·m row and the
27.3
N·m row produce the same clamp load. Apply the dry
number to a waxed fastener and you are at roughly twice the intended preload, which
for a 8.8 is past yield.
Assumptions behind these numbers
T = K × D × F with K = 0.20, F = 0.75 × proof load, and proof load = tensile stress area (39.17 mm²) × the grade's proof strength. This is a general-engineering starting point for a reusable steel-on-steel joint. It is not a substitute for a manufacturer's torque sequence on an engine, a suspension component, a pressure vessel or any structural connection.