M33×2 Torque Spec
Calculated preload torque by grade, plus what actually changes the number.
M33×2 · 8.8 · dry threads
2184 N·m
1611 lb-ft · targets 330.9
kN clamp load (75% of proof)
By grade
| Grade | Dry (N·m) | Lubed (N·m) | Dry (lb-ft) | Clamp load | Ultimate tensile |
|---|---|---|---|---|---|
| 4.6 Low-carbon steel, general purpose | 847 | 636 | 625 | 128.4 kN | 304.3 kN |
| 8.8 Medium-carbon, quenched & tempered — the default structural grade | 2184 | 1638 | 1611 | 330.9 kN | 608.6 kN |
| 10.9 Alloy steel, Q&T — high strength | 3126 | 2344 | 2305 | 473.6 kN | 791.2 kN |
| 12.9 Alloy steel, Q&T — highest common grade (socket head cap screws) | 3653 | 2740 | 2694 | 553.5 kN | 928.2 kN |
| A2-70 304 stainless, cold worked | 1695 | 1271 | 1250 | 256.8 kN | 532.6 kN |
Why lubrication changes everything
Roughly 90% of the torque you apply is consumed by friction — under the head and in the threads. Only about 10% becomes useful bolt stretch. That means the friction coefficient, not the bolt, sets the relationship between torque and clamp load. Here is the same M33×2 8.8 fastener under different conditions:
| Thread condition | Nut factor K | Torque for same preload |
|---|---|---|
| Plain / as-received, dry | 0.20 | 2184 N·m |
| Zinc plated, dry | 0.22 | 2403 N·m |
| Black oxide, lightly oiled | 0.18 | 1966 N·m |
| Machine oil on threads | 0.15 | 1638 N·m |
| Molybdenum disulfide / anti-seize | 0.12 | 1311 N·m |
| Waxed or PTFE coated | 0.10 | 1092 N·m |
Torquing a lubricated bolt to the dry spec overloads it — the
1092
N·m row and the
2184
N·m row produce the same clamp load. Apply the dry
number to a waxed fastener and you are at roughly twice the intended preload, which
for a 8.8 is past yield.
Assumptions behind these numbers
T = K × D × F with K = 0.20, F = 0.75 × proof load, and proof load = tensile stress area (760.8 mm²) × the grade's proof strength. This is a general-engineering starting point for a reusable steel-on-steel joint. It is not a substitute for a manufacturer's torque sequence on an engine, a suspension component, a pressure vessel or any structural connection.